FRP Static Mixer

Product Details:

Our range of PVC Static Mixers can be manufactured using PP, PVC, FRP, PVDF, PTFE, SS, and MSRL to suit highly corrosive circumstances. Mixing is one of the most essential processes for any chemical process industry. These industries are always aim to achieve better mixing in a very cost effective manner. Static mixer offered by us is unique because the material itself is moved through its elements as next to blades though material in dynamic mixers. Our mixers can be used to mix different types of paste, slurry, liquid and gases. These are known for its features such as no maintenance problems, exceptionally long life, and continuous operation.

Our static mixers are designed after careful study of various process parameters such as viscosity, density, flow rate, pressure drop and desired COV –coefficient of variation (a measure for degree of mixing), reynolds number, and flow type- laminar or turbulent. It us the most advanced method for mixing. The incessant phase material and the additives phase are mixed and then passed through a number of elements with. The element shifts the mixture radically in and out while enduring to flow in axial track. This action leads division and union of flow of material at each element. Finally, the mixture becomes homogeneous ensuing in excellent mixing.

Features:

• Highly efficient mixing
• Low energy consumption
• No moving parts for maintenance free operation
• No direct motive power required
• No need for tanks in most cases
• Ease of installation
• Minimal space requirement
• Totally enclosed pipe designs
• Optional injectors and sample points
• Available in all sizes
• Available in a wide range of materials
• Custom design

Applications of Static Mixers:

• Aerating water for FE and MN removal
• Neutralization by addition of caustic
• Dissolving ozone
• Mixing of flocculants such as FECL3

Cosmetics and detergents:

• Saponifying greases with caustic soda
• Diluting surfactants

Chemicals:

• Mixing miscible/dispersing immiscible reactants
• Neutralization of process streams
• Mixing of gases in front of catalytic reactors combustion

Energy:

• Mixing blast furnace and coke oven gas
• Blending fuel gases with air before combustion

Polymers:

• Mixing additives, catalysts, into polymers
• Rapid heating of polymers
• Homogenization of temperature and colorants in polymer

Petrochemical:

• Chlorination of hydrocarbons
• Pulp and paper
• Mixing bleaching chemicals with pulp

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),D/P,D/A

Product Details:

Introduction:

• We offer wide range of static mixer particularly used for mixing of many chemicals or additives to water & waste water. typical applications include Mixing of polyelectrolyte, SMBS, coagulant, Alum, FeSo4, acid or alkali addition for neutralization etc. The equipment achieves rapid mixing in short span of length wherein no additional power or rotary equipments are required for mixing. This leads to lot of savings on power & capital equipment costs.
• Mixing is an important & indispensable part of any chemical process industry. It is very important to achieve better mixing in a very cost effective way. SCIPL Static Mixer provides the best solution for such requirements.
• Static Mixer/ In-line Mixers are unique in a way where material itself is moved through elements/blades as against blades though material in dynamic mixers. Be it paste, slurry, liquid or gas, Static Mixer eliminate costly downtime and enhance product and process control. SCIPL static mixers have no moving parts to cause maintenance problems, and they deliver exceptionally long, worry-free life.
• After careful study & consideration of various process parameters such as Viscosity, Density, Flow rate, Pressure Drop & desired CoV –Coefficient of variation (a measure for degree of mixing), Reynold???s number, flow type- Laminar or turbulent; we at Shalin Composites design & fabricate static mixers for various applications. Our vast experience & expertise in field of composites enable us to offer static mixers in various material of construction viz: PP, PVC, FRP, PVDF, PTFE, SS, and MSRL to suit highly corrosive conditions.

The continuous phase material & the additives phase to be mixed are passed through certain number of elements with an application specific design & dimensions. The element moves the mixture radially in & out while continuing to flow in axial direction. This unique action causes division & union of flow at each element. At the end of the elements the mixture thus becomes homogeneous resulting in excellent mixing.

Advantages Of Static Mixers:  

• Highly efficient mixing.
• Low energy consumption.
• No moving parts for maintenance free operation.
• No direct motive power required.
• No need for tanks in most cases.
• Ease of installation.
• Minimal space requirement.
• Totally enclosed pipe designs.
• Optional injectors and sample points
• Available in all sizes.
• Available in a wide range of materials.
• Custom design.

Water & Waste Wastewater

• Aerating water for Fe & Mn removal.
• Neutralization by addition of caustic.
• Dissolving ozone
• Mixing of flocculants such as FeCl3 .

Cosmetics & Detergents:

• Saponifying greases with caustic soda.
• Diluting surfactants.

Chemicals:

• Mixing miscible/dispersing immiscible reactants.
• Neutralization of process streams.
• Mixing of gases in front of catalytic reactors combustion.

Energy:

• Mixing blast furnace & coke oven gas.
• Blending fuel gases with air before combustion.

Polymers:

• Mixing additives, catalysts, into polymers.
• Rapid heating of polymers
• Homogenization of temperature& colorants in polymer

Petrochemical:

• Chlorination of hydrocarbons

Pulp & Paper:

• Mixing bleaching chemicals with pulp

Product Details:

We are engaged in providing Plastic Static Mixer.

Product Details:

FRP Static Mixer is an important & indispensable part of any chemical process industry It is very important to achieve better mixing in a very cost effective way. Shalin Stat,c Mixer provides the best solution for such requirements.

Static Mixer/ In-line Mixers are unique in a way where material itself is moved through elements/blades as against blades though material in dynamic mixers. Be it paste, slurry, liquid or gas, Static Mixer eliminate costly downtime and enhance product and process control. DME static mixers have no moving parts to cause maintenance problems, and they deliver exceptionally long, worry-free life.

After careful study & consideration of various process parameters such as Viscosity Density, Flow rate, Pressure Drop, desired CoV Coefficient of variation (a measure for degree of mixing), Reynold’s number & flow type- Laminar or turbulent; we at Shalin Composites design & fabricate static mixers forvarious applications.

Our vast experience & expertise in field of composites enable us to offer static mixers in various material of construction viz: PF PVC. FRP, PVDF, PTFE, SS, and MSRL to suit highly corrosive conditions.

Salient features of DME Static mixers:

• Highly efficient mixing
• Low energy consumption
• No moving parts for maintenance free operation
• No direct motive power required
• No need for tanks in most cases
• Ease of installation
• Minimal space requirement
• Totally enclosed pipe designs
• Optional injectors and sample points
• Available in all sizes
• Available in a wide range of materials
• Custom design

Additional Information:

• Port of Dispatch: Mumbai
• Packaging Details: sea worthy packing

Product Details:

We are providing Inline Mixers

Features:

• High flow rates
• Improved mixing performance
• Reduce energy consumption
• Large wrench flats
• Reduce back pressure during operation
• PVC construction, with stainless steel bands, aids in chemical compatibility
• Clear PVC sight tube allows easy viewing of the mixing process
• Standard 1 in. female NPT threads on the inlet and outlet ports
• Standard 1/2"- 20" in. female NPT threads on the injection port

Product Details:

Air handling equipment plays a vital role in chemical, pharmaceutical & various other industries where poisonous & corrosive gases laden with vapors and particulates have to be handled. Our Specialized knowledge of the use of thermoplastic & thermoset materials with complete design know-how has enabled us to design most efficient, cost effective & reliable fume exhaust systems.

Depending on the application blowers are classified into low prerssure – high volume, medium pressure medium volume & high pressure low volume categories.

With help of advanced customized software we at Shalin Composites, design & fabricate, chemical & corrosion resistant blowers and ducting for fume extraction as per customer’s requirements & plant demands. Our software tools helps us to precisely select the optimum blade design from wide range of options giving us most economical design.

Blower are available in different capacities and pressure ratings & with belt driven & direct driven option.

MOC of DME blowers:

• PP, PVC, FRP, PP & FRP, PVC+FRP

Applications:

• Fume extraction,
• Ventilation,
• scrubbing,
• Degasification