Shalin Composites India Pvt Ltd
Malad West, Mumbai, Maharashtra
SEND SMS
SEND EMAIL
Product Details:
| Minimum Order Quantity | 100 Unit |
| Steel Grade | SS304L |
| Usage | Water Filter |
| Capacities | 1-2 inch, 2-3 inch, 3-4 inch, 4 inch |
| Material | Stainless Steel |
| Finish | Epoxy powder coated or hot dip galvanized |
| Warranty | one year |
Product Details:
| Minimum Order Quantity | 1 Unit |
| Operating Pressure | 2.5 bar -25 bar |
| Material | Stainless steel, carbon steel (with or without inner lining) or glass fibre reinforced plastic (GFK) |
| Brand | Shalin |
| Medium | Water |
| Flow Rate | 8 m3/h - 9,000 m3/h |
| Finish | Epoxy powder coated or hot dip galvanized |
The ASC-Filter range from DM Engg, works based on Bernoulli’s principle. ASC filters are equipped with a timer circuit and a differential pressure switch. The filter continues it’s operation until preset timer value is reached or a differential pressure value is reached.
The filter enters into cleaning mode on the trigger by any of these two inputs. On receiving signal the control panel opens the auto drain valve and after a short interval, a piston fitted with a sweeping disk in a closed filter chamber is moved up and down. This action creates low pressure and high-pressure zones inside the same vessel due to varied velocities between moving disk and filter screens.
As a result of this flow, a reversal takes place dislodging the clogged impurities from the filter screens. Once the piston completes the cleaning cycle the drain valve is automatically closed and filter resumes next cycle.
The USP of DM Engg's ASC filter is it continues to filter inlet stream while the cleaning is in progress.
Salient features of ASC filters form DM Engg.
Materials
The filter vessel can be produced of stainless steel, carbon steel (with or without inner lining) or glass fibre reinforced plastic (GFK).
Inserts
The filter insert can be supplied made of stainless steel, titanium or Super Duplex materials, PP. Other material can be supplied upon request.
Applications
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Unit |
| Material | PP + FRP |
| Brand | Shalin |
| Cartridges Type | Double open end, single open end, flat top, arrow head |
| Finish | Epoxy powder coated or hot dip galvanized |
| Warranty | One year |
| End Connection | Standard flanges |
Materials
The filter vessel can be produced of stainless steel, carbon steel (with or without inner lining) or glass fibre reinforced plastic (GFK).
Inserts
The filter insert can be supplied made of stainless steel, titanium or Super Duplex materials, PP. Other material can be supplied upon request.
Applications
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Unit |
| Brand | Shalin |
| Model | Self Cleaning |
| Material | PP + FRP |
| End Connection | Flange End |
| Finish | Epoxy powder coated or hot dip galvanized |
| Warranty | one year |
Additional Information:
